Plastic Top Nut  4 Strings

Four pre marked string notches .

This nut can be used on many instruments with four strings at the top nut including 5 string, plectrum, tenor, and ukulele banjo, ukulele and tenor guitar .

Nut sizes on these instrument do vary so check this is the size for your instrument.

Overall dimensions 30mm x 5mm x 8,5mm  
Between strings 8mm
Ends to strings 3mm

These nuts can be used for left or right handed when fitted the ready marked string position require further cutting the get the string height over the first fret right and to take the strings gauges being fitted.

If the string are too high at the first fret it raises the pitch so the note sounds sharp.

Ideally a set of gauged string files is required, but on a one off basis a junior hacksaw and  a needle file will do the job.